| Modify
|
Used to select a surface member property to modify.
Selection made here enable the
"to modify" property settings. Options are:
- Change
Thickness - Enables the
Mode and
Thickness settings.
- Add
Openings - Prompts you to select opening elements:
"> Select cutting profile > Shape"
- Change
Material - Enables the
Material setting.
- Change
Load Resistance - Enables the
Load setting.
|
| Mode
|
Used to select a method for changing the thickness
of the surface member. Options are:
- Absolute -
Thickness is modified by the
Thickness setting.
- Relative -
Thickness is modified by the
Thickness setting, relative to the
existing surface member thickness.
- By
Point - Thickness is modified by entering a datapoint.
|
| Thickness
|
Specifies the thickness (or height) of the surface
member.
|
| Material
|
Used to select a material definition. Available
materials are those added/imported to the project dgnlib or active dgn using
Material Manager. You can open Material Manager by clicking the browse button
to add materials.
|
| Load
|
Used to select the type of structural load the
member supports. Available types:
- Not Set
- Gravity Only
- Gravity and Lateral
- Lateral Only
- Non Structural
|
| Delete Construction
|
When on the boundary shape is deleted. When off, the
shape is not deleted.
|
Used to modify a surface member
(slab, pile cap, footing, wall, cladding) or a group of surface members
selected by double clicking on a member or with the Element Selection (
) or Place Fence (
) tools.
